FAQ for 400G Transceivers and Cables

Comments

Post a Comment

Popular posts from this blog

NVIDIA GB200 Interconnect Architecture Analysis-NVLink, InfiniBand, and Future Trends

Image
  NVIDIA GB200 Interconnect Architecture Analysis-NVLink, InfiniBand, and Future Trends 1.   NVLink Bandwidth Calculation There is a lot of confusion in NVIDIA's calculation of NVLink transmission bandwidth and the concept of SubLink/Port/Lane. Typically, the NVLink 5 bandwidth of a single GB200 is 1.8TB/s, which is calculated by bandwidth-oriented individuals in bytes per second (Byte/s). However, on NVLink Switches or IB/Ethernet switches and network cards, Mellanox's perspective calculates it in terms of network bandwidth, usually in bits per second (bit/s), based on the transmitted data bits.   Here, we'll explain in detail the calculation method of NVLink. Starting from NVLink 3.0, it is composed of four differential pairs to form a "sub-link" (often referred to by NVIDIA as Port/Link, with some ambiguity in definition). These 4 pairs of differential signal lines simultaneously contain both the receiving and transmitting directions of signal lines. Typically,...
Read more

A Complete Guide to NADDOD’s Popular 100G Optical Transceivers

Image
At present, the technology of 100G Ethernet is becoming mature and the deployment of 100G Network by enterprises, institutions and governments has been gradually put on the right track. 100G optical transceiver has the characteristics of high port density, low power consumption and low cost. It is popular with data center and is usually used with 100G switch. NADDOD’s 100G optical transceiver is fully compatible with switches from Cisco, Arista, Juniper and so on, offering a full range of optical transceiver solutions to help users build cost-effective network systems. NADDOD 100G QSFP28 Optical Transceiver Module NADDOD 100G QSFP28 optical transceivers can satisfy the requirements of different transmission distance: short distance (2km or less), middle distance (2–10km), and long distance (10km or more). At present, among the three kinds of distance, the 2km middle distance occupies the main market share. NADDOD 2km QSFP28 optical transceivers are available in QSFP-100G-PSM4 and QSFP-...
Read more

Focusing AI Frontiers: NADDOD Unveils 1.6T InfiniBand XDR Silicon Photonics Transceiver

Image
With AI and data centers expanding, the demand for high-speed optical modules is experiencing unprecedented growth. At the same time, the pace of   optical module upgrades   to higher speeds is accelerating in order to cope with the continuously climbing data processing and transmission requirements resulting from model training. While the previous transition from 100G to 400G took more than three years, the generation replacement from 800G to 1.6T is expected to be shortened to less than two years. In 2024, 1.6T transceivers have already appeared, and it is estimated that in 2025, the production of 1.6T optical modules may grow rapidly.     To cope with the growing demand for AI and the rising demand for computing, NADDOD has launched the   OSFP-1.6T-2xDR4 , a high-speed silicon phtonics transceiver specifically tailored for 1.6T InfiniBand XDR. InfiniBand XDR（eXtended Data Rate）is the new speed generation in the   IBTA roadmap   after   NDR ,...
Read more